AEPWAR07 - Forward Edge of the Battle Area
$7.00 AEPWAR07 - Forward Edge of the Battle Area
3D
Published 2024-02-28T19:06:14+00:00
The War series of terrain was created by Colin Christenson. War Trenches is based on our 2nd published set, Peaceful Gardens, but diverges greatly from the unspoiled grounds. This set works and integrates completely with the entire Peaceful series of terrain, but this one is focused on the battlefields, of combat and tight trenches. This one is focused on War.
Joshua Kitson-Long, Nasos Maloudis, Windy Wolfe and Will Walker all cooperated on this series, with Joshua taking the lead for this installment. Joshua, aka JKL, is a master of scene setting and directed this project from the start. We hope the models in this set are exactly what your table needs.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 28/02/2024 |
| Price | $7.00 |
| Support Free | YES |