AECATA04 – Vokodlak Half Sized Catacombs
$14.00 AECATA04 – Vokodlak Half Sized Catacombs
3D
Published 2022-07-04T08:59:34+00:00
This set, Catacombs The Vokodlak's Half Sized Catacombs, has gone through a large reworks since the original publishing. First made as a miniatures-only set from Nasos Maloudis, it has been greatly expanded. Nasos wanted a unique set of vampires that would strike fear into the hearts of mortal men. Over time Jonathan Laager, Will Walker, and Carl Csúrgó have all added their own touches. Jonathan especially deserves credit for this rework. He set himself to the task, driven by his own desire to ensure our patrons and tribesfolk have the best possible sets.
Four of the miniatures print without supports on FDM printers, but the centerpiece comes presupported for resin printers.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
| Date published | 04/07/2022 |
| Price | $14.00 |
| Support Free | YES |